Flotation Machine

High efficiency
Low energy consumption
High-capacity
Low cost

A Brief Overview:

The flotation separation process is completed by the jaw crusher, the ball mill, the classifier, the magnetic separator, the flotation machine, the concentrator and the dryer with the help of the elevator and the conveyor.

Features

The main equipment

The flotation separation process is completed by the jaw crusher, the ball mill, the classifier, the magnetic separator, the flotation machine, the concentrator and the dryer. This production process has the merits of high efficiency, low energy consumption, high-capacity and low cost.

Flotation machine

The Processes

After preliminary crushing by the jaw crusher, the ores will be sent to the ball mill by the lifting device and the feeder for further crushing and grinding. Afterwards, they come to the next process: classifying. According to the principle that different particle sizes with different proportion have certain terminal velocity, the fine particles float on the water and overflow out while the coarse particles sink to the bottom. Thus, the materials are separated and washed clean.

When they pass through the magnet separator, they are further separated under different magnetic force and mechanical force due to respective susceptibility.

After initial separation by the magnet separator, the particles will be put in the flotation machine. Different minerals are added different drugs to be separated from others. Since the separated minerals contain large amount of water, they should be concentrated by the concentrator and then dried by the dryer. At last, the dry mineral powders can be obtained.

Technical Data

Technical Parameters of BF Flotation Machine

Model	Trough cubage （m³）	Inside dimensions （L×W×H）（m）	Air suction amount （m³/㎡·min）	Power （kw）	Motor model	Processing capacity （m³/min）	Single trough weight (kg)
BF-0.37	0.37	0.74×0.74×0.75	0.9～1.05	1.5	Y90L-4	0.2～0.4	470
BF-0.65	0.65	0.85×0.95×0.9	0.9～1.10	3.0	Y132S-6	0.3～0.7	932
BF-1.2	1.2	1.05×1.15×1.10	1.0～1.10	5.5 4.0	Y132M2-6 Y132M1-6	0.6～1.2	1370
BF-2.0	2.0	1.40×1.45×1.12	1.0～1.10	7.5	Y160M-6	1.0～2.0	1750
BF-2.8	2.8	1.65×1.65×1.15	0.9～1.10	11	Y180L-8	1.4～3.0	2130
BF-4.0	4.0	1.9×2.0×1.2	0.9～1.10	15	Y200L-8	2～4	2585
BF-6.0	6.0	2.2×2.35×1.3	0.9～1.10	18.5	Y225S-8	3～6	3300
BF-8.0	8.0	2.25×2.85×1.4	0.9～1.10	22 30	Y225M-8 Y250M-8	4～8	4130
BF-10	10	2.25×2.85×1.7	0.9～1.10	22 30	Y225M-8 Y250M-8	5～10	4660
BF-16	16	2.85×3.8×1.7	0.9～1.10	37 45	Y280S-8 Y280M-8	8～16	8320
BF-20	20	2.85×3.8×2.0	0.9～1.10	37 45	Y280S-8 Y280M-8	10～20	8670
BF-24	24	3.15×4.15×2.0	0.9～1.10	45	Y280M-8	12～24	8970

Technical Parameters of SF Flotation Machine

Model		SF0.37	SF0.7	SF1.2	SF2.8	SF4	SF8
Trough capacity（m³）		0.37	0.7	1.2	2.8	4	8
Impeller diameter（mm）		300	350	450	550	650	T60
Production capacity （m³/min）		0.2-0.4	0.3-0.9	0.6-1.2	1.5-3.5	0.5-4	4-8
Impeller rotation speed （r/min）		352	400	312	268	238	191
Motor	Model	①Y90L-4	①Y100L₂-4	①Y132M₂-6	①Y160L-6	①Y180L-6	①Y250M-8
	Model	②Y90S-4	②Y90S-4	②Y90S-4	②Y90S-4	②Y90L-4	②Y100L-6
	Power（kw）	①1.5	①3	①5.5	①11	①15	①30
	Power（kw）	②1.1	②1.1	②1.1	②1.1	②1.5	②1.5
Dimensions（mm）		700×700×750	900×820×950	1100×1100×1100	1700×1600×1150	1850×2050×1200	2200×2900×1400
Single trough weight（kg）		468	600	1373	2338	2660	4486

Inquiry

Note: If you're interested in the product, please submit your requirements and contacts and then we will contact you in two days. We promise that all your informations won't be leaked to anyone.

Hot-selling Products

Basing on the raw materials prehomogenization technology and rotary

The Sand Machine in our company is developed by introducing the

It can realize dry type or wet type grinding for all kinds of ores

Official Website: www.hxjq.com
E-mail: sales@hxjq.com
MSN: hxjq@hxjq.cn

Topic:	*
Company Name:
Name:	*
Tel:	*
E-mail:	*
Message: